View STF120NF10_7437009.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

may 2011 doc id 9522 rev 7 1/21 21 stp120nf10, stb120nf10 STF120NF10, stw120nf10 n-channel 100 v, 0.009 ? , 110 a stripfet? ii power mosfet in to-247, to-220, d2pak, to-220fp features exceptional dv /dt capability 100% avalanche tested application oriented characterization application switching applications description these devices are n-channel power mosfet realized with stmicroelectronics unique stripfet? process has specifically been designed to minimize the on-resistance. it is therefore suitable as primary switch in advanced high-efficiency, high-frequency isolated dc-dc converters for telecom and computer application. it is also intended for any applications with low gate drive requirements. figure 1. internal schematic diagram type v dss r ds(on) max i d stw120nf10 stp120nf10 stb120nf10 STF120NF10 100v <0.0105 ? 110 a 110 a 110 a 41 a to-247 1 3 1 2 3 to-220 d2pak 1 2 3 to-220fp table 1. device summary order codes marking packages packaging stb120nf10 b120nf10 d2pak tape and reel STF120NF10 120nf10 to-220fp tu b e stp120nf10 p120nf10 to-220 stw120nf10 w120nf10 to-247 www.st.com
contents stb/f/pw120nf10 2/21 doc id 9522 rev 7 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
stb/f/pw120nf10 electrical ratings doc id 9522 rev 7 3/21 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit to-220, to-247, d2pak to-220fp v ds drain-source voltage (v gs = 0) 100 v v gs gate-source voltage 20 v i d drain current (continuous) at t c = 25 c 110 41 (1) 1. limited only by maximu m temperature allowed. a i d drain current (continuous) at t c =100 c 77 29 (1) a i dm (2) 2. pulse width limited by safe operating area. drain current (pulsed) 440 164 (1) a p tot total dissipation at t c = 25 c 312 45 w derating factor 2.08 0.30 w/c dv/dt (3) 3. i sd 120 a, di/dt 300 a/s, v dd = 80%v (br)dss peak diode recovery voltage slope 10 v/ns e as (4) 4. starting tj = 25 c, i d = 60 a, v dd = 50 v single pulse avalanche energy 550 mj t j t stg operating junction temperature storage temperature -55 to 175 c table 3. thermal resistance symbol parameter value unit to-220 to-247 d2pak to-220fp r thj-case thermal resistance junction-case max 0.48 3.33 c/w r thj-amb thermal resistance junction-ambient max 62.5 62.5 c/w r thj-pcb (1) 1. when mounted on 1inch2 fr-4 board, 2 oz cu thermal resistance junction-pcb max 35 c/w t l maximum lead temperature for soldering purpose 300 300 c
electrical characteristics stb/f/pw120nf10 4/21 doc id 9522 rev 7 2 electrical characteristics (t case = 25 c unless otherwise specified) table 4. on/off states symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 250 a, v gs = 0 100 v i dss zero gate voltage drain current (v gs = 0) v ds = max rating, v ds = max rating@125c 1 10 a a i gss gate body leakage current (v ds = 0) v gs = 20 v 100 na v gs(th) gate threshold voltage v ds = v gs , i d = 250 a 24v r ds(on) static drain-source on resistance v gs = 10v, i d = 60 a (1) 1. for to-220fp i d = 40 a 0.009 0.0105 ? table 5. dynamic symbol parameter test conditions min. typ. max. unit g fs (1) 1. pulsed: pulse duration=300s, duty cycle 1.5% forward transconductance v ds =25 v, i d = 60 a -90 s c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds =25 v, f=1 mhz, v gs =0 - 5200 785 325 pf pf pf q g q gs q gd total gate charge gate-source charge gate-drain charge v dd =80 v, i d = 120 a v gs =10 v (see figure 16) - 172 32 64 233 nc nc nc
stb/f/pw120nf10 electrical characteristics doc id 9522 rev 7 5/21 table 6. switching times symbol parameter test conditions min. typ. max. unit t d(on) t r t d(off) t f turn-on delay time rise time turn-off delay time fall time v dd =50 v, i d = 60 a, r g =4.7 ?, v gs =10 v (see figure 15) - 25 90 132 68 - ns ns ns ns table 7. source drain diode symbol parameter test conditions min. typ. max. unit i sd source-drain current - 110 a i sdm (1) 1. pulse width limited by safe operating area source-drain current (pulsed) - 440 a v sd (2) 2. pulsed: pulse duration=300s, duty cycle 1.5% forward on voltage i sd =120 a, v gs =0 -1.3v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd =120 a, di/dt = 100 a/s, v dd =40 v, tj=150 c (see figure 20) - 152 760 10 ns nc a
electrical characteristics stb/f/pw120nf10 6/21 doc id 9522 rev 7 2.1 electrical characterist ics (curves) figure 2. safe operating area figure 3. thermal impedance figure 4. safe operating area for to-220fp figure 5. thermal impedance for to-220fp figure 6. output characterisics figure 7. transfer characteristics ) $ 6 $3 6 ! /perationinthisareais ,imitedbymax2 $3on ?s ms ms 4j?# 4c?# 3ingle pulse !-v
stb/f/pw120nf10 electrical characteristics doc id 9522 rev 7 7/21 figure 8. normalized b vdss vs temperature figure 9. static drain-source on resistance figure 10. gate charge vs gate-source voltage figure 11. capacitance variations figure 12. normalized gate threshold voltage vs temperature figure 13. normalized on resistance vs temperature
electrical characteristics stb/f/pw120nf10 8/21 doc id 9522 rev 7 figure 14. source-drain diode forward characteristics
stb/f/pw120nf10 test circuits doc id 9522 rev 7 9/21 3 test circuits figure 15. switching times test circuit for resistive load figure 16. gate charge test circuit figure 17. test circuit for inductive load switching and diode recovery times figure 18. unclamped inductive load test circuit figure 19. unclamped inductive wavefor m figure 20. switching time waveform am0146 8 v1 v g s p w v d r g r l d.u.t. 2200 f 3 . 3 f v dd am01469v1 v dd 47k ? 1k ? 47k ? 2.7k ? 1k ? 12v v i =20v=v gmax 2200 f p w i g =con s t 100 ? 100nf d.u.t. v g am01470v1 a d d.u.t. s b g 25 ? a a b b r g g fa s t diode d s l=100 h f 3 . 3 1000 f v dd am01471v1 v i p w v d i d d.u.t. l 2200 f 3 . 3 f v dd am01472v1 v (br)d ss v dd v dd v d i dm i d am0147 3 v1 v d s t on td on td off t off t f t r 90 % 10 % 10 % 0 0 90 % 90 % 10 % v g s
package mechanical data stb/f/pw120nf10 10/21 doc id 9522 rev 7 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com. ecopack is an st trademark.
stb/f/pw120nf10 package mechanical data doc id 9522 rev 7 11/21 figure 21. to-220fp drawing table 8. to-220fp mechanical data dim. mm min. typ. max. a4.4 4.6 b2.5 2.7 d 2.5 2.75 e0.45 0.7 f0.75 1 f1 1.15 1.70 f2 1.15 1.70 g4.95 5.2 g1 2.4 2.7 h 10 10.4 l2 16 l3 28.6 30.6 l4 9.8 10.6 l5 2.9 3.6 l6 15.9 16.4 l7 9 9.3 dia 3 3.2 7012510_rev_k a b h di a l7 d e l6 l5 l2 l 3 l4 f1 f2 f g g1
package mechanical data stb/f/pw120nf10 12/21 doc id 9522 rev 7 table 9. d2pak (to-263) mechanical data dim. mm min. typ. max. a 4.40 4.60 a1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 d 8.95 9.35 d1 7.50 e10 10.40 e1 8.50 e2.54 e1 4.88 5.28 h15 15.85 j1 2.49 2.69 l 2.29 2.79 l1 1.27 1.40 l2 1.30 1.75 r0.4 v2 0 8
stb/f/pw120nf10 package mechanical data doc id 9522 rev 7 13/21 figure 22. d2pak (to-263) drawing figure 23. d2pak footprint (a) a. all dimension ar e in millimeters 0079457_r 16.90 12.20 9.75 3 .50 5.0 8 1.60 footprint
package mechanical data stb/f/pw120nf10 14/21 doc id 9522 rev 7 table 10. to-220 type a mechanical data dim. mm min. typ. max. a 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 d 15.25 15.75 d1 1.27 e10 10.40 e 2.40 2.70 e1 4.95 5.15 f 1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ? p 3.75 3.85 q 2.65 2.95
stb/f/pw120nf10 package mechanical data doc id 9522 rev 7 15/21 figure 24. to-220 type a drawing 00159 88 _typea_rev_ s
package mechanical data stb/f/pw120nf10 16/21 doc id 9522 rev 7 table 11. to-247 mechanical data dim. mm min. typ. max. a 4.85 5.15 a1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 d 19.85 20.15 e 15.45 15.75 e5.45 l 14.20 14.80 l1 3.70 4.30 l2 18.50 ? p 3.55 3.65 ? r 4.50 5.50 s5.50
stb/f/pw120nf10 package mechanical data doc id 9522 rev 7 17/21 figure 25. to-247 drawing 0075 3 25_f
packaging mechanical data stb/f/pw120nf10 18/21 doc id 9522 rev 7 5 packaging mechanical data table 12. d2pak (to-263) tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 10.5 10.7 a 330 b0 15.7 15.9 b 1.5 d 1.5 1.6 c 12.8 13.2 d1 1.59 1.61 d 20.2 e 1.65 1.85 g 24.4 26.4 f 11.4 11.6 n 100 k0 4.8 5.0 t 30.4 p0 3.9 4.1 p1 11.9 12.1 base qty 1000 p2 1.9 2.1 bulk qty 1000 r50 t 0.25 0.35 w 23.7 24.3
stb/f/pw120nf10 packaging mechanical data doc id 9522 rev 7 19/21 figure 26. tape figure 27. reel p1 a0 d1 p0 f w e d b0 k0 t u s er direction of feed p2 10 pitche s c u m u l a tive toler a nce on t a pe +/- 0.2 mm u s er direction of feed r bending r a di us top cover t a pe am0 88 52v2 a d b f u ll r a di us g me asu red a t h ub c n reel dimen s ion s 40mm min. acce ss hole at s lot loc a tion t t a pe s lot in core for t a pe s t a rt 25 mm min. width am0 88 51v2
revision history stb/f/pw120nf10 20/21 doc id 9522 rev 7 6 revision history table 13. revision history date revision changes 20-mar-2006 2 preliminary datasheet 31-mar-2006 3 typing error 19-jun-2006 4 new template, no content change 28-jun-2006 5 new i d value on table 2 05-oct-2006 6 new value on table 7 11-may-2011 7 added new package and mechanicala data: to-220fp.
stb/f/pw120nf10 doc id 9522 rev 7 21/21 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STF120NF10

	To Download STF120NF10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .